Fume Hood (Wooden)

Fume hoods are designed to contain and exhaust toxic. Obnoxious or otherwise harmful gases, vapors, mist etc to protect personnel and equipment. A motor driven blower creates negative pressure within the chamber extracting the contaminated air from work-area and expel it in to the atmosphere. The hood is ventilated of the air drawn from inside the laboratory which is used effectively for thorough sweep out of work chamber. Fabricated out of best quality thick weather resistant Duro board clad in mica lamination from outside, inner chamber finished in chemical- resistant Epoxy paint and work surface covered with thick non-glosing & non – rating stainless steel sheet and counter balanced sliding Sash. Fluorescent tubes are fitted inside. A gas tap and an electric plug is also provided to work on 220/230 V AC 50 HZ power plug. A work bench/Table (Optional) to install equipment any where in the lab can b e supplied. The work bench is fabricated out of square steel pipe or hard wood and have a cupboard and a drawer.            
Size of Working Area - 3’x2’6”x4 - 4’ x 2’6” x 4’