Automatic Water Distillation Equipment (Cabinet Model)

Compact & User Friendly

This is a fully automatic water distillation equipment and can be used in research laboratories, hospitals etc. It is manufactured from 3.3 exp borosilicate glass or quartz glass. The distillation has following features :

• Replaceable Silica Sheathed (Quartz) Heater : The horizontal jacket is fitted with removable silica sheathed heater and screw threaded connectors for ease of cleaning.
• Distillate temperature is approx. between  25º to 45º C which is ensured by an efficient condenser.
• Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy.
• Screw Threaded Connectors : These are provided for easy plumbing & Installation to avoid any glassware breakage during assembly.
• Fuse is provided for safety in case of voltage fluctuation or short circuit.

Additional Built-in Safety Features   

• Gate Valve : Conserves cooling water wastage in case of power failure.
• Flow Switch : In-built safety feature for the equipment unit shut off in case of cooling water failure.
• Temperature Switch : The boiler is equipped with a safety temperature switch which shuts off the unit if water level in the boiler falls below the heater, thus saving the glass parts from any damages.
• Level Sensor : It shuts off the distillation equipment if the water level in the boiler falls below the heater.

Borosilicate Glass

Model No.	EROSE-20S	EROSE-20D	EROSE-40S	EROSE-40D
Output Cap. (approx.)	2 ltrs/hr	2 ltrs/hr	4 ltrs/hr	4 ltrs/hr
Stage	Single Stage	Double Stage	Single Stage	Double Stage

Distillate Quality

pH	5.5-6.0	6.0-7.0	5.5-6.0	6.0-7.0
Conductivity µS/cm	1.0-2.0	0.8-1.0	1.0-2.0	0.8-1.0
Cooling Water Requirement (approx.)	1.5 ltr/min	2ltr/min	2-3ltr/min	2-4ltr/min
Power Rating (Total)	1.5 KW	3.0 KW	3.0 KW	6.0 KW